Deyang Dongsen Hydropower Equipment Co., Ltd.
Strict process discipline to ensure the quality of the project!
Add to Cart
The propeller and Kaplan turbines are reaction turbines of the axial fow type.The difference between the propeller and Kaplan turbines is the propeller turine has fixed runner blades while the Kaplan turbine has adjustable runner blades.
| Water Head | 5m-60m
|
| Runner Diameters | 0.5m-5m
|
| Power Range | 100KW to 70MW
|
| Frequency | 50HZ/60HZ
|
| Generator Voltage | 400V 800V 6300V 10500V
|
| Layout pattern | Horizontal or Vertical
|
| Material(blades) | Stainless Steel ZG0Cr13Ni4Mo
|
| Excitation | Brushless or Static excitation system
|
| Generator Insulation | F/F
|
| Lifespan | 30~50 years
|
| Manufacturer |
|
Product Details
This belongs to customized products. We could design products according to your requirement. All of our products are strictly designed and manufactured under ISO9001 quality management system and TUV, BV.
our factory
MAIN PRODUCTS
We could supply Francis turbine, Pleton turbine, Kaplan turbine, Propeller turbine, Tubular turbine etc. as well as butterfly valves, gate valves, ball valves, and all kinds of electrical panels.
DSSD is an experience EPC supplier for hydropower plant and served for more than 500 hydropower plants and our engineers have more than 30 years' experience.
ONE STOP PURCHASE FROM WATER TO WIRE DESIGN TO POWER
YOUR BEST PARTNER
1.You are a trading company or a manufacture?
We are a hydro turbine generator manufacturer supplied equipment for more than 500HPPs. The engineers have over 30 years' experiences. Our factory is in Deyang city, Sichuan, you will take 2 hours driving after you reach Shuangliu Airport, pay a visit to our factory you will know more about us and discuss the details.
2.What Kind of hydropower micro should I choose?
We need to know water head, flow rate, voltage level, frequency, on-grid or off-grid running, automation level from you to work out the solution.
3: Can you do the EPC for the hydro power plant?
Yes, We can design, producing and install the equipment, we will dispatch technologist and workers to install the equipment.
4: What the packing of the equipment?
We will use wooden box or plastic film to protect the products.
This belongs to customized products. We could design products according to your requirement. All of our products are strictly
designed and manufactured under ISO9001 quality management system and TUV, BV.
Please can you send me below parameters, so our engineers could support your project?
Where is the plant?
1. Design head: ___m
2. Design flow: ___m³/s
3. Frequency: 50Hz or 60Hz?
4. Unit Capacity: ___KW；How many kw each unit? How many units?
5. Power factorCOSφ:
6. Generator output voltage: __V
7. On-grid or Off-grid type? (On-grid type voltage: ____Kv)
8. a.s.l: ___ m
9. Basic situation about the project and your company introduction.